Phillips screwdriver 1. Move the passenger seat fully backwards. 2. Remove the protective cover under the glove box. 3. Open the glove box. 4. Unscrew the glove box fastening screws.
Use a Phillips screwdriver. 5. Pry up, carefully release from the fasteners and remove the side trim panel on the passenger side. 6. Remove the glovebox. AUTODOC recommends:
Be careful to avoid damaging the glove compartment fasteners. 7. Remove the cabin filter housing cover 8. Remove the cabin filter. AUTODOC recommends:
Do not attempt to clean and reuse the filter – it will affect the quality of air cleaning inside the car. 9. Install the cabin filter to its mounting seat. AUTODOC recommends:
Check out the correct location of the filter element. Do not skew. Follow the air flow direction arrow on the filter.
Take care to only use quality filters. 10. Reinstall the cabin filter housing cover
Make sure you hear a click indicating that it is locked in place. 11. Install the glove box. 12. Screw the glove box fastening screws.
Use a Phillips screwdriver. 13. Install the side trim panel.
Position the part using the guides and lock the fasteners. AUTODOC recommends:
Do not apply excessive force when installing the part. Otherwise you may damage the fasteners. 14. Close the glove box. 15. Install and secure the protective cover under the glove box. AUTODOC recommends:
Do not apply excessive force when installing the part. Otherwise you may damage the fasteners. 16. Return the passenger seat to its initial position. 17. Switch on the ignition. 18. Switch on the air conditioning system.
This is necessary in order to make sure that the component operates properly.